Products: Engines
« »
1 Comments Share
CUMMINS ISX12

Cummins says its new ISX12 engine offers "significant" fuel economy improvements for regional-haul, vocational, and specialty applications.

An evolution of the ISX11.9, released about 18 months ago primarily for vocational use, the revised engine is said to deliver fuel economy improvements of as much as 12% in such work. The gain is "up to 5%" in regional hauling.
 
The ISX12 is said to be a step above the previous model in this power range -- 310 to 425 hp -- by way of improvements realized through optimized calibrations.

Featuring better pulling power, "excellent" driveability, and strong clutch-engagement torque, says Cummins, the ISX12 is designed for rigorous duty cycles, including those for work trucks such as dump, mixer, and refuse trucks. Full suites of horsepower and torque ratings are also available for fire and emergency vehicles, recreational vehicles, and motor coaches as well as regional-haul and daycab operations in class 8 trucks.

The engine flows out of what was called the Dakota project several years ago, a co-operative venture with a couple of truck makers. The effort dissipated and today's engine is a much different beast than that original, though the 12-litre capacity has remained. It uses several components in common with the ISX15, including an enhanced cooled exhaust gas recirculation (EGR) system, a single variable-geometry turbocharger, and the proprietary XPI common-rail fuel system. Like all the company's big-bore and midrange engines, the ISX12 sports selective catalytic reduction aftertreatment.

For regional hauling and LTL distribution, standard ratings range from 310 to 425 hp (231-317 kW) and SmartTorque ratings from 330 to 425 hp (246-317 kW). For vocational applications, the ISX12 is said to offer a high power-to-weight ratio and 800 lb ft (1085 Nm) of clutch-engagement torque. Eight vocational and five refuse ratings are available, along with integrated rear- and front-engine power take-off and hydraulic drive options.

The ISX12 will be in full production in March 2012.

Follow Cummins on Twitter at http://twitter.com/cumminsengines and YouTube at http://youtube.com/cumminsengines.

 
Email Editor     Comment Below
Rate this Article!
Filed Under: Cummins ISX12 ISX11.9 ISX15 fuel economy improvements vocational regional haul
We Recommend:
Popular this Week:
Social Activity


(optional)

(optional)

(optional)

Notify me of other comments on this story (requires email and password)


* Please type the letters above exactly as they appear:  

Please Note:

While we value your feedback, please avoid profane or personal attacks. You should know that if your comment contains libelous, prejudicial or just plain wrong statements, it will be deleted.

amarks

Rating
12
66
54
We are using the 11.9 L engine in transit and are having problems with EGR coolers failing asearly as 20,000 km. When this happens on some of them, the engine will not start. The ECM is seeing turbo vanes wide open. I think Cummins should tweek their program to at least put the engine in derate mode rather than a total no start. We had Cummins change a cooler under warranty, change oil, perform regen, everything shows okay. We put unit in service, unit did not start the next morning, shows fault for turbo vanes. Another thing is the breather filters plugging up at 25,000 km.

Report Abuse

Video Reel